| Overview |
|
Requirements |
|
Cables |
|
Installation |
|
Configuration |
|---|---|---|---|---|---|---|---|---|
|
The Command Alkon Incorporated Engine Data Controller (EDC) is a manufacturer-delivered system that consists of a WiFi-enabled on-board computer (OBC) adapter and uniquely-designed diagnostic cable. Unlike the older OBC units with multiple codependent components, EDC devices require only a vehicleAll machines used as a means of production on a construction site or at a batch plant. diagnostics port to begin pulling engine data and a wireless connection with a configured driver tablet to interface with TrackIt.
Overview
This installation guide covers the four main components of performing a field installation with the EDC.
- Ensure all components are included and hardware or software requirements met. In preparation for the installation, you should gather together the tools necessary to install the new system.
- Use a compatible engine and power diagnostics cable. The unique design of the EDC and its connector requires the use of new cabling that you'll want to ensure are supported.
- Connect the EDC and diagnostic cable to your truck's ECU. Once you've removed the old OBC, the process of installing the EDC and its accompanying cable begins.
- Configure the driver tablet to connect with the EDC wirelessly. The final step of the installation process is configuring your tablet(s) to connect with a specific EDC device via wireless hotspotGeographic areas marked on a map that act as destinations for driver navigation or triggers for automated behaviors in TrackIt..
|
|
|
|
